Lovenicewatches.net, enjoy the life Watch 2017-12-18
For a long time to buy the watch, which place should be cleaned and maintained, and how to do it?
Watch case maintenance
Maintenance of a watch is watch case, strap, movement three parts. Let’s start with the shell. The material of the case can be divided into four types: 18 K gold, gold plating, titanium alloy and fine steel. The process is generally brushed and polished two, occasionally saw process matte polishing, some senior table also love to the top of diamond, this noble case is only to watch the special maintenance center. While the average of its appearance to maintain basically the continuation of the brushed and polished, but only for small scratches on the case, if it is caused by the bump dent, basically can not be repaired.
Many people see a new look after each maintenance, and think of a little scratch for maintenance. Yes, it can be, but it is necessary for the clockwork fish to remind you that every time you do your maintenance, your watchcase will be a little less thick, and this is irreversible, that is to say, your watch case will be damaged to a certain extent once it is maintained for a time. Because the so-called buffing is simple said, take your case to scratch off, in order to achieve the overall balance, no scratches around to wear off.
So if your watch case is K gold, then I suggest not to maintain it so diligently, not to scratch with one or two scratches, and so on. The scratch is quite a lot. Once again, to solve it one by one, in fact, it will reduce the overall wear of the watch case to a certain extent. If it is just a very small scratch, wipe with K gold cloth.
As for the gold plating of fine steel, my suggestion is to pay more attention to it at ordinary times, and see that there is a soft rubbing on the table with dust. Because the gold plated watch case outer layer is a very thin layer of gold precipitation is very uniform, unlike the K gold so stable, after a certain period of time will appear in the fall and fade, gilded watchcase scratches on there is no way to do polishing repair, because after grinding to scratch the exposed steel is refined. Will affect the appearance of.
There is something called “paint brush” on the market, claiming that it can fill the scratches and gaps after the gilt case shell is fading, but in fact, clockwork fish do not support this way. Because first of all, no one dared to say that the chemical composition in the pens would never affect the shell material. Second, the use of the paint pen, it is also difficult to ensure the durability of the paint color, the effect is not very good. Again, if you are not careful to delimit, no scratch where it is very beautiful effect.
If your watch case is used in the drawing process, maintenance costs may be slightly more expensive than polishing, because drawing repair difficulty is relatively large, and the drawing are all down to create a direction, it is also the first repair worn scratches, again by the repair table according to the division of the original drawing texture with grinding wheel re grinding out the same drawing, and this process is done by hand, rather than simply polishing is much more complicated.
Say why movement needs maintenance. The smooth running of the machine cannot do without oil, but the oil is liquid, long time using the watch after the oil will gradually drying, drying, easy to form a viscous grease, resulting in poor operation or stop turning gear; dust, fiber and other foreign substances may be entered from the gap of the case, the formation of mechanical dirt. Therefore, we must give the watch to “wash” maintenance.
Wash oil include cleaning and oil, two parts. First of all, for cleaning, which requires the mechanical movement of all parts are removed with special cleaning fluid to sludge cleaning deposition during the operation of clean, after cleaning liquid volatile dry, point a special form of oil, to the assembly as is complete, after repeated testing and debugging, then ensure that the function and the same watch the whole process of maintenance, until the end.
The strap has a steel belt, a belt, a gold steel belt and a few kgold strap. This bar fish mainly talks about the maintenance of steel belt and belt, and the maintenance mode of the gold steel belt and kgold strap can be carried out with the reference of steel. You have no professional home near the table rows assured to provide maintenance services, simple maintenance, a fish to teach you how to watch strap can be completed at home but remember, we must first put the watch strap down, do not even a header clean directly, the reason is to avoid the water in the process of cleaning water directly to the head in the water erosion.
If your watch is equipped with a steel strip, then prepare a toothbrush, a little toothpaste, wipe a table cloth, a hairdryer. Toothpaste contains abrasives, abrasives, including calcium carbonate, calcium hydrogen phosphate, silica, aluminum hydroxide and other substances. These molecules are very small, and can be filled into scratches in the watchband, which can play a certain repair effect. But if the bump caused by the dent, and the case, can not be repaired.
With a soft toothbrush with toothpaste, both inside and outside the steel brush, and then rinse with water after brushing off the foam, then use dry cloth to wipe the table, then the best hair dryer air dry thoroughly to prevent residual lead watchband, watchband oxidation. The maintenance method is simple and convenient, and the cleaning effect is very obvious. Of course, if you are too lazy to take care of yourself, you can get the watch directly. They will put your watch in the special ultrasonic cleaner, and the effect will be more obvious than that of yourself.
Leather Watchband can be divided into two layers, with the time mainly for the outer layer, inner layer is for soft lining skin, directly absorbed by human body sweat, is basically no way to deal with the. Because the belt is soft and fragile, especially after a long time wear, it is inevitable that there will be a crease. The hair fish would not recommend a toothbrush.
You can use a wet towel with less water than the water, first scrubbing the appearance of the belt, and then quickly dry with dry towels. Then spray “Blue Pearl” on a dry towel, and then wipe the strap again, playing the role of clean and protective. The whole process is best controlled in a minute, otherwise the water will be absorbed by the strap.
In fact, the hair fish still have a small technique for the maintenance of the belt, but there is a risk, only to do the reference. It is to use towel to dip alcohol, quickly wipe on the watchband, and then quickly press on with the absorbent paper towel, so that moisture can be sucked, so that the paper towel can absorb the moisture at the same time, and at the same time, it can take away the dirt on the watch to a certain extent. In addition, you should also pay attention to the belt watch in the cool and ventilated place, avoid being exposed to the strong sunlight and use the same watch belt for a long time, so that the life of the belt will be extended. Whether it is a steel belt or a belt, it is better to send a regular service to the clock Center for professional maintenance.
In addition to the daily maintenance and cleaning of the watch, we also want to know the other information about the watch, and welcome to me. And don’t forget to look at those taboos about watches.